Diversified Forum
Sign up Calendar Latest Topics Chat
 
 
 


Reply
  Author   Comment  
kgladfelter

Moderator
Registered:
Posts: 14
Reply with quote  #1 
Thanks to our North Carolina distributors installing many WOD systems for bringing this to our attention.

Instructions for Fix with birds present.

  1.  Elevate line so birds can not drink from it
  2.  Shut off supply at the reducer, using ball valve
  3.  Trigger nipples to reduce column pressure
  4. Remove the Black rubber plug from the top cap
  5.  Insert a #6 M Alan key into this hole
  6. Gradually turn counter clockwise about ½ turn
  7. Turn water on and see if this has lowered the reducers setting to where it is needed
  8.  If it is fine; high pressure flush the line using flush bypass (end assembly must also be open with drain hose to exit building)
  9.  Hold hand under the adjustment knob to be sure a slow leak has not developed while in flush mode.
  10.  If this leaks slowly, turn bolt clockwise slightly while in flush until leak stops.
  11.  Turn off flush, activate nipple to reduce column pressure and inspect if this has accomplished low enough pressure.
  12.  Replace black plug and lower line
Click Below for a document on converting regulators to pressure reducers.

docx 120420_WOD_Instructions_for_converting_Plasson_Regulators_to_Reducers.docx    

0
kgladfelter

Moderator
Registered:
Posts: 14
Reply with quote  #2 
New Video coming soon!
0
Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.