Example-- You install a new CPU off the shelf in a 50 stage Platinum Plus and all you get is a blank screen. If this happens chances are it was tested in a 40 stage, and the reason the screen is blank is because the 40 stage software is not compatible with the larger screen. This can also happen if the reverse is true (it was tested in a 50 and you have installed in a 40). If this happens it's no big deal. Below is a note I will start including in all arm CPU's sold as spare parts. I have also attached a PDF of the detailed update instructions on a PDF
If screen is blank when installing in Platinum load software from SD CARD.
Hold Down and Left Arrow keys while powering on controller to access boot loader menu.
The password is 1948
(317.27 KB, 24 views)