Diversified Forum
Sign up Calendar Latest Topics Chat

  Author   Comment  
Randy Davis

Avatar / Picture

Posts: 26
Reply with quote  #1 
If the RDT5 acts erratic a simple cold start may be all that is needed to resolve the issue.  The cold start works just like all of the Rotem products and will reset the software back to factory configuration.  The process is as follows:
Cycle both power sources to the RDT5 to off.
Press and hold the select button, up arrow button and the down arrow button.
While hold all three buttons down turn the power source back on.
If done correctly will see CLD appear on the screen.
The device will reboot with factory settings and will need to be reprogrammed with your curves and set points.
Previous Topic | Next Topic

Quick Navigation:

Easily create a Forum Website with Website Toolbox.